Dual Line Lubrication System consist of pumping station, in line filter, end pressure relay piping dose feeders, end pressure relay, pressure reducing valve which are fitted as per decided scheme and the items are monitored with control panel. When pump is started , grease/oil shall be delivered to first main line and will finally reach to connected lubricating points through dose feeder. Once lubricant is delivered to all points pressure in line starts rising as pump is still supplying grease/oil. As soon as pressure crosses set pressure value at end pressure relay, pressure reversing valve, through control panel actuates Lubricants starts flowing into second line. Delivery of grease/;oil to lubricating points takes place and pressure rises again. When it crosses set pressure of end pressure relay, system stops. Cycle is over and thus all lubrication points are lubricated. Now after pressure 'OFF' time starts again and repeats above sequence.DUAL LINE DOSE FEEDERS -DV/DW SERIESDV SERIES:
DV type series is widely used in concentrated lubrication equipments. For DV series Dose Feeder the lubrication points are on one side of Dose Feeder Block. These are available in both odd and even number of outlets as per requirement. During working of one line metered amount of grease/oil is distributed to all the lubrication points and after changeover to second line the same lubrication points in one cycle of working of dual line lubrication system. The accurate discharge of grease oil can be applied to all the lubrication points by adjustments through adjusting screw. The indicator pins provides indicates the working of each dose feeder element. The DV series dose feeder are of various sizes, DV 30, DV 40, DV 50 and DV 60 depending upon the range of lubricant outlets.DW SERIES:
The DW series dual line dose feeder of even numbers of discharge points and on both sides of a block. As the DW series dual line dose feeder has discharge ports at one side and similar on other side . The grease/oil outlet port can also be transferred from the sides to the top of Dose Feeder Block by opening the top side and closing the side outlet of blocks. During working cycle one line, the metered amount of grease/oil is distributed to all the lubrication points on one side of dose feeder block and after the line changes over to the second line, the metered line of grease /oil is distributed to all the lubrication points to other side of distribution block. The DW series dose feeders are of various sizes, namely DW 20, DW 30, DW 40 and DW 50 depending upon the range of grease/oil outlet.
We are a renowned name, which is engaged in delivering a comprehensive range of Dose Feeders. The offered range is made utilizing high grade raw material and innovative technology in strict compliance with the industry laid norms and standards by vendors. Along with this, the offered range is suitably inspected on different characteristics to maintain its authenticity throughout the designing process.Features:
- Dose feeder is a steel block having two inputs to be connected with dual line coming from the lubricating pump
- Durable standards
- Reliable operations
- Outlet connections of dose feeders are connected to lube points by branch pipe line