Owing to the immense experience and a competent team of personnel, we are able to offer Metering Cartridges. The offered assembly of metering cartridges is made utilizing superior grade raw material and modern machinery in strict compliance with the international quality norms. Along with this, the offered range of metering cartridges is checked on different characteristics to ensure that defect-free products are delivered at clients' premises.
Products incorporated in this range are mentioned below:
We are an eminent name, which is engaged in offering Metering Cartridges to the clients. The offered range of metering cartridges is manufactured utilizing high grade raw material and advanced machinery in strict compliance with the industry laid norms and standards by vendors. Additionally, the offered range of metering cartridges is suitably checked on different parameters to ensure that defect-free products are delivered at customers'' premises.
The element is a valve which ejects out metered amount of oil to lubrication point
It is a sort of mini cylinder with a special check valve where stroke of piston determines the dosage of oil
The complete design of metering cartridge does not allow it to leak at low as well as at high pressure of oil
The ejected oil will not return back to the cartridge due to in-built check valve
The metering cartridges are supplied along with copper seal ring (washer)
D1 * dosage: With dosage 0.01/0.03/0.05/0.10/0.16 cc per cycle with ± 15% accuracy of dosage
D X 1 * dosage: Above items with honed bore, silicon rubber with ± 10% accuracy of dosage
D2 * dosage: With dosage 0.25/0.40 cc per cycle with ± 10% accuracy of dosage
D X 2 * dosage: Above items with honed bore, silicon rubber with ± 10% accuracy of dosage
D3 * dosage: With dosage 1.0/1.60 cc per cycle with ± 15% accuracy of dosage
D X 3 * dosage: Above items with honed bore, silicon rubber with ± 10% accuracy of dosage
Bearing area in cm. sq
up to 4
4 to 12
12 to 20
20 to 40
40 to 65
65 to 100
100 to 150
150 to 400
400 to 650
Dose of Metering Cartridges in CC
0.01 (1/3 drop)
0.03 (1 drop)
0.05 (2 drops)
0.10 (3 drops)
0.16 (5 drops)
0.25 (8 drops)
0.40 (12 drops)
1.00 (30 drops)
1.60 (50 drops)
Metering Cartridge with Indicator Pin
Suitable for inlet tube of 6mm OD, while on outlet it is 4 mm OD tube.
Dosage: 0.1, 0.2, 0.3, 0.4, 0.5 cc/stroke.
For ordering example HBL-3-131 means 3 outlet cartridge with 0.1,0.3,0.1 cc/stroke discharge.
This system is best suited for machines for the lubrication of slides, conveyors, chains & spindles. If required the discharge of the oil can be preset from 0.05, 0.1. 0.3cc per cycle. For ordering following is the example. SMP-4-2, i.e. 4 Point block each giving .2cc per cycle discharge of oil in the from of MIST.
Single Shot Injector
|Material of Construction||CEN-III- Carbon Steel CEN-IV- Carbon steel|
|Inlet size (through manifold) Outlet Size||CEN-III-1/4" NTP CEN-IV-3/8" NTP CEN-III-4mm OD tube CEN-IV- 6mm OD tube|
|Discharge (Output) adjustable||CEN-III- 0.016gm-0.16gm/stroke CEN-IV- 0.16gm-1.6gm/stroke|
|Operating pressure Suitable for oil and grease||CEN-III-More than 30 Kg/cm2 CEN-IV-More than 30 Kg/cm2 CEN-III-Up to NIG-II CEN-IV- Up to NIG-II|
- Injectors are designed to adjust the amount of grease/lubricant in metered quantity, based on the requirement of individual bearings in a Lubrication System.
- Each injector has an arrangement to be mounted separately or grouped together in multiple numbers and fed through a common manifold with feeder lines, branching out.
- Important step in operation is to ensure that before the commencement of next cycle, the pressure in the system reduced.
- The unique advantage in using the system reduced.
- Depending upon lubricant requirement, adjustment in metering is possible while running.
- The movement of indicating pin denotes feeding of lubricant.
- The system has good application on Hot zone machines, Type industries, Injection molding, Bottle & glass blowing Industry etc.