Multi Line Radial Lubricator System
We are readily engaged in delivering a superior range of Multi Line Radial Lubricator System. The offered range is available in different customized specifications and forms as per the diverse requirements of esteemed clients. Along with this, the offered range is suitably tested on different characteristics to maintain its authenticity throughout the designing process. This range is ideally utilized in different sectors such as sugar machines, cement plants, steel mills, paper plants, hydro turbine, stone crushers, vehicle lubrication and earth moving equipment.
Products incorporated in this range of plant lubrication systems are suitably mentioned below:
Multi Line Axial Lubricator
In case the output shaft is not coupled with the geared motor, it can be actuated with the help of chain coupled with the rotating motion of machine of with manual handle.
The advantages of this type of Horizontal Axial Lubricator are given below :
- Very simple for maintenance.
- Can be attached with the machine drive directly.
- The noise level is very low.
- The churning of grease is very uniform which makes the grease flowable.
- It is equally suitable for oil lubrication.
- Compact in size with respect to vertical type Radial Lubricator.
- For high capacity of grease/oil additions cylindrical reservoir can be attached.
|Reservoir capacity - Ltrs||4||8||15|
|No. of outlets (Pump Elements)||4||8||16|
|Delivery pressure-kg/cm2|| |
|Dose of pump/cycle (adjustable)-cc per pump element|| |
0.05 to 0.25 (max. 5 gm/minute)
|Reduction Ratio of Drive|| |
Normally 30 unless otherwise specified
|Power of Motor-Hp, 3 Phase 415 V, AC, 4 Pole||0.25||0.50||1.0|
Miniature Series Of Radial Lubricator
Miniature Radial Lubricator
We are a leading name, which is engaged in delivering Miniature Radial Lubricator to our clients. The offered range is made utilizing high grade raw material and modern machinery in strict compliance with the international quality norms and standards by vendors. Moreover, the offered range is tested on different parameters to ensure that error-free products are delivered at customers'' premises.
- It is a miniature lubricator. meant to discharge fixed amount of liquid grease/grease from plunger pumps.
- Reservoir stores the liquid grease
- Motorized system where motor is built in with a gear box
- In case of grease filling through a port having NRV
- A cam mounted on gear box shaft activates the plunger
- Lubricator is meant to run intermittently with the help of timer (optional)
- Grease level sensing/oil level sensing is possible, however (optional)
- Reservoir capacity: Model-MRL1-2- 1 liters (steel)
- Model-MRL-2-3- 2 Liters (Acrylic)
- No. of outlets (pump element): Model-MRL1-2- 2 (max.)
- Model-MRL-2-3-3 (Max.)
- Delivery pressure-kg/cm2: 200 (max.)
- Dose of pump/cycle per pump element: 3 gm/minute
- Reduction ration of drive: 70:1
- Power of motor single phase 24/12V, DC: 40 watt
- Overall size-mm: Model-MRL1-2-, L-280, W-200 and H-250
- Model-MRL-2-3-: L-280, W-200 and H-340