Product Price :Get Latest PriceIt is a simpler series where discharge cannot be altered. It is fixed (0.4gm/point/stroke). The width and height of this block are 95 and 85 mm respectively. Inlet port size of this block is 1/4" BSP and outlet suitable for 6mm OD tube. indicator Pin can be provided as optional. Any outlet port if not in use, cannot be unlocked, under any circumstances. SIMA is a main supplier of such accessories in major parts of South India. The available models are PB-6, PB-8, PB-10 and PB-12.
|Model-PB-6||:||No. of Outlets-6|
Length in mm-95
|Model-PB-8||:||No. of Outlets-8|
Length in mm-120
|Model-PB-10||:||No. of Outlets-10|
Length in mm-150
|Model-PB-12||:||No. of Outlets-12|
Length in mm-175
Product Price :Get Latest Price
We are an eminent name, which is engaged in offering Progressive Block AR-Series to the clients. The offered range is made utilizing high grade raw material and innovative technology in strict compliance with the industry laid norms. Along with this, the offered range is available in different customized specifications and forms as per the diverse requirements of esteemed clients.
Product Price :Get Latest Price
With a competent team of hard working professionals, we are able to offer Progressive Block LPB-Series. These products offered by us are made utilizing high grade raw material and innovative technology in strict compliance with the industry laid norms and standards by vendors. Along with this, the offered range is suitably checked on different parameters to maintain its authenticity throughout the designing process.
Product Price :Get Latest PriceIt is a reed micro switch ; when excited from a magnet at the end of the piston section, produces a signal which confirms end of the cycle. It is NA contact ( 20W-0, 5-200 V commutable voltage).
|Maximum Pressure||70 kg/cm2|
|Recommended grease||NLGI No 00-1.2|
|Discharge amount||0.1, 0.14, 0.18, 0.24, 0.3|
|Min. number of ports||3|
|Max. number of ports||12|
Product Price :Get Latest PriceIn case number of lubrication points to be fed are many i.e. more than 12 nos. It is advisable to use master block as primary feeder. Lubrication line from master block shall be connected to secondary block from where lubrication points are joined. The discharge of master block is more than the secondary block. Master Block has pressure indicating pin in each line. In case of over pressure, pressure indicating pin comes out. This happens when the line coming out from the master block get chocked.
|Series||No. of points||Discharge/Outlet|
|DPZ 6||6||0.8-1.5 cc/cycle|
Product Price :Get Latest PriceDPK series is a complicated block. DPK series are the units with smallest metering capacity in the System. Working pressure in this case is 125 kgs/cm2 .
|Part number||Max. no. of outlets||Dimensions|
|Double Outlet||Single Outlet (1)|
|Part Number||Capacity/ccs||Part Number||Capacity/ccs|
|KD* 008||0,08||KS* 008||0,16|
|KD* 012||0.12||KS* 012||0,24|
|KD* 016||0,16||KS* 016||0,32|
|KD* 020||0,20||KS* 020||0,40|
|KD* 024||0,24||KS* 024||0,48|
|KD* 028||0,28||KS* 028||0,56|
|KD* 032||0,32||KS* 032||0,64|
Product Price :Get Latest PriceIn this series discharge of block is . 1 to .4 cc/cycle adjustable. This block can be directly attached to the pump and can feed upto 12 lubrication points (maximum). These blocks are available in 6, 8, 10 & 12 outlets version. If the no. of lubrication points in machine are quite many, in combination with master block, secondary block of DPX are to be used.
Explore More Products