Srujana Industrial Marketing Associates

It senses the end pressure in both the lines and gives signal to change over valve through control panel. To check pressure two pressure gauges of suitable range are provided. Pressure switches are mounted to register pressure and give command to panel.

With immense experience and a competent team of proficient personnel, we are able to offer Electrical Change Over Valve (For End Type). The offered range is manufactured utilizing high grade raw material and innovative techniques in strict compliance with the industry laid norms. In addition to this, the offered range is inspected on varied characteristics to ensure that flawless products are delivered at customers' premises.

Features:

• This reversing valve is most reliable device to be used in dual line system. Its commanded by a 3 ph motor
• Reverse pressure of the system is adjustable by means of end of line pressure switch
• There are 2 micro switches which control both movement and position of reversing piston
• It is suitable up to flow of 80 kg/hr of grease
• Operating pressure is up to 400 bar.

OLG I-

Technical Features- For Model ALU-03

OLG II-

Technical Features- For Model ALU 05/08 & above.

• Vertical Float Switch (VF)
• Horizontal Float Switch (HF)

In order to cater to the diverse requirements of esteemed clients, we are able to offer Relief Valve to the respectable clients. The offered range is made utilizing optimum grade raw material and modern machinery in strict compliance with the highest quality norms and standards by vendors. Moreover, our quality personnel make sure to inspect the offered range stringently to ensure its adherence with the international quality standards.

Features:

• Efficiency
• Reliable
• Durable
• RV I (1/2")-
• For model ALU series lubrication units.

• T-1- 20 drops per minute approx at 4-5 bar.
• T-2- 30 drops per minute approx at 4-5 bar.
• T-3- 50 drops per minute approx at 4-5 bar.

• PS-8-30- Technical Specification- For Motorized Lubrication Unit for Model ALU-03/05/08 and above.
• PS-4-20- Technical Specification- For Motorized Lubrication Unit for Model CENMIN/ELU-2007.
• PS-Fixed-3- Technical Specification- For Motorized Lubrication Unit for Model Elu-2007.

In order to comprehend and meet the diverse requirements of respectable clients, we are able to offer Manifolds. The offered range of manifolds is designed utilizing optimum grade raw material at reliable vendors' premises. Along with this, the offered range of manifolds is tested on different characteristics to ensure its conformation with the international quality standards and norms.

Features:

• Manifolds are nothing but steel blocks for mounting metering cartridges
• These have two ports and few side outlets. On side outlets, metering cartridges are screwed directly while in lines ports are meant for joining next manifold in line with 6 mm OD tube
• For fixing manifold on machine wall, there are mounting holes suitable for M5 screws
• For D1 and D2 models of metering cartridges, there are manifolds of 4 sizes namely, 1 way (Model M1), 2 way (Model M2), 3 way (Model M3) and 5 way (Model M5)
• The nomenclature states the number of cartridges, a manifold can maximum accommodate
• These models of manifolds have M8 x 1 tapping for fitment of metering cartridges
• The unused side outlets can be blocked with M8 x 1 plugs
• For D3 model of metering cartridges, there are manifolds of 2 sizes namely 1 way (Model M1A), 3 way (Model M3A)
• The nomenclature states the number of cartridges, a manifold can maximum accommodate
• These models of manifolds have M10x1 tapping for fitment of metering cartridges
• The unused side outlet can be blocked with M10x1 plugs

Our customers can avail Tube Fittings from us. The offered range of tubing & fitting is available in number of customized designs, shapes, colors and allied specifications in accordance with the diverse requirements of esteemed clients. Moreover, the offered range of tubing & fitting is checked on different characteristics to maintain its authenticity throughout the designing process.

Features:

• Tubing and fittings are basic accessories for the lubrication system
• From the pump to the manifold and from the manifold to the lubrication point with in between metering cartridges tubings are required. These can be steel tube, copper tube, nylon tube or hoses
• For ejecting oil into the lubrication points, fittings are essential part of various threads

In order to ensure the delivery of grease free from any foreign particles, in line filter is fitted in grease feeding line. The design of the filter is such that it can be easily dismantled for cleaning. The cartridge of the filter is of stainless steel with a steel mesh of 160 micron rating. Inlet and outlet port generally is of 3/8" BSP.

We are an eminent name, which is engaged in delivering hydraulic over pressure reversing valve (for loop type). This range is widely known for diverting the grease from line i to line ii as soon as sufficient preset pressure reaches on the valve. For tracking the grease flow alternatively from one supply line to the other, reversing valve must be utilized. Along with this, the reversing valve is hydraulically operated in suitable from 150-400 bar and is ideal for flow of grease from 45-50 kg/hr. A micro switch is attached to rod of the valve to indicate any transformation over the signal and relief screw aids in pressure setting in the valve.

We have gained immense expertise in offering Reservoir to the customers. The offered range of reservoir is manufactured utilizing high grade raw material and modern machinery in strict compliance with the international quality norms and standards by vendors. Along with this, the offered range of reservoir is suitably checked on different characteristics to maintain its authenticity throughout the designing process.

Features:

• Beneficial
• Offer complete solution
• Cost-effective