- Home
- ยป
- Products & Services
- »
- Centralized Grease Lubrication System
Centralized Grease Lubrication System
Owing to the immense experience and a competent team of professionals, we are able to offer an unparalleled range of Centralized Grease Progressive Lubrication System. The offered range is manufactured utilizing optimum grade raw material at reliable vendors' premises. Along with this, the offered range is suitably inspected on different characteristics to maintain its authenticity throughout the designing process. The offered range possesses pumping units, progressive blocks and tubing. This range is manually operated, pneumatically operated or motorized. The offered range is known for rendering calculated amount of grease on each stroke of the handle/pneumatic cycle/minute. Along with this, varied outlets of the progressive blocks to the machine lubrication points normally tube/hose 6 OD x 4ID is used while for main line 10 OD X 81D.
Products incorporated in this range are mentioned below:
Manual Grease Pump
Product Brochure
Capacity | 1.5 Kgs (Acryclic) |
Machine Type | Manual |
Output | 6 gm/stroke |
Max Flow Rate | 6 gm/stroke |
We are an eminent organization, which is engaged in offering Manual Grease Pump-Model GP 15-6. The offered range is available in different customized specifications and forms as per the diverse requirements of esteemed clients. Along with this, the offered range is inspected on different characteristics to maintain its authenticity throughout the designing process. Ideally utilized for ejecting established amount of grease on each full stroke of handle, grease is ejected out from the outlet of the pump under pressure.
Features:
On pulling the handle, suction port of the cylinder gets filled with the grease. Spring pressure through follower plate exerted over the top surface of the grease (filled in the reservoir) further helps to push the grease in the suction port
Grease can be filled into the reservoir either by opening top lid or through the filling port provided at the side of the body
To check reverse flow of grease, a non return valve is put in the system at the outlet port
Pump has its own reservoir for storage of grease. It has transparent acrylic reservoir
Pump has wall mounted construction
Outlet port size: 1/4" BSP
Model | Reservoir Capacity in Kg | Discharge of Grease per stroke in Gms | Maximum Pressure if Grease in Kg/Cm2 | Size L x W x H in mm |
GP-15-6 | 1.5 | 6 | 150 | 165 x 140 x 365 |
Additional Information:
- Item Code: Model-GP-15-6
Pneumatic Grease Pump
Product Brochure
Capacity | 1.5 Kgs (Acryclic) |
Material | Aluminium |
Output | 100 Kg/cm2 |
Max Flow Rate | 3-10 gm adjustable (optional) |
Frequency | 30 Seconds |
We have gained immense expertise in delivering Pneumatic Grease Pump- Model PNGP 15-10 to our clients. The offered range is manufactured utilizing optimum grade components at reliable vendors' premises. Along with this, the offered range is suitably inspected on different parameters to ensure its compliance with the international quality norms and standards by vendors.
Features:
- The available model is PNGP 15-10
- This pump is pneumatically operated. It has its own reservoir made of Acrylic. Input pneumatic pressure approximate 5-6kg/cm2
- Mounting of pump is through 2 holes
- Filling of the grease is done through proper port provided at the housing
- Spring loaded cup is provided in the reservoir for positive suction of grease
- Telltale rod is provided (optional) for grease level sensing electrical with the help of limit switch
- For adjusting the output of the grease discharge an adjusting screw is provide (as optional)
Additional Information:
- Item Code: Model-PNGP-15-10
Motorized Grease Pump
Capacity | 2 Liters |
Material | Aluminium |
Machine Type | Pneumatic |
Output | 80 Kg/cm2 |
Max Flow Rate | 60 gm per Minute |
Voltage | Single Phase,220 V |
We are an eminent name, which is engaged in delivering a comprehensive range of Motorized Grease Pump. The offered range is made utilizing high grade raw material and modern machinery in strict compliance with the industry laid norms and standards by vendors. Moreover, the offered range is suitably inspected on different characteristics to maintain its authenticity throughout the designing process.
Features:
- This is a compact pumping station
- A motor of 220 V, 50 Hz, 40 W is operated, giving continuous NLG-I/II greasing at the outlet of the pump
- The reservoir is built-in with the pump
- Pump can develop pressure of 100 kg/cm2. The discharge is of the order of 60 gm/minute
- This pump is suitable for, single line progressive greasing system/ grease dispensing system for auto components
- Normally this system runs periodically or run as per machine requirements
- Outlet port size: Suitable for 6mm OD tube
Outlet port size : Suitable for 6mm OD tube.
Reservoir capacity | Motor | Discharge | Pressure | Size in mm |
1.5 kg | 220V 50 HZ 40W | 60gm/min | 100 kg/cm2 | 200 x 120 x 280 L x W x H |
Additional Information:
- Item Code: MSK-602-T2P
- Delivery Time: With in 2 Weeks
CNC Machine Wiper
Material | Steel |
Model/Type | Guide way wipers,EN-II Wiper,C2 Wiper,Moulded Wipers |
Length | 500mm Length |
Technique | Using for Guideways |
Guide Way Wipers, EN-II, C2 Wiper, Moulded Wiper, Guide Way Rubber Wipers
Motorized Grease Pumping Station
We are able to offer a wide array of Motorized Grease Pumping Station at clients' premises. The offered range is made utilizing high grade raw material, which is procured from reliable vendors of the market. Along with this, the offered range is checked on different characteristics to maintain its authenticity throughout the designing process. This range possesses a motorized high pressure dual line grease pump for intermittent working with various accessories.
Features:
- The pump is driven by an electric motor / coupled with a reduction gear box through a flexible coupling
- On the gear box output shaft, a cam is mounted which drives no. of spring loaded high pressure pumping elements
- These pumping elements are positioned radially on a ring, on which a reservoir is mounted complete with tell tale rod assembly for indicating level of grease
- Pumping elements push grease at high pressure through seamless tube to a junction block
- A pressure relief regulating valve is incorporated in the line to relieve the excess grease pressure to the tank
- Grease is further fed through a filter to change over valve
- Function of change over valve is to deliver grease through one of the outlet ports alternative after receiving signal from over pressure relay
ZBK- 12M | |||||||
Model | DL-I | DL-II | DL-III | DL-IV | 30E | 40E | 100E |
Reservoir Capacity kg. | 40 | 70 | 100 | 140 | 30 | 40 | 100 |
Lubricant (Grease) upto Grade NLGI | II | II | II | II | III | III | III |
Max Discharge Capacity in gm/mt | 50 | 100 | 125 | 150 | 100 | 150 | 150 |
Max. Discharge Pressure in kg/cm2 | 100 | 150 | 200 | 250 | 400 | 400 | 400 |
Centralized Grease Lubrication System
Our commitment and strict adherence to customer satisfaction have given us repeat business. Our range of Centralized Grease Lubrication System is stringently tested on different quality parameters. We regularly upgrade our processing techniques to deliver the best quality products to our valuable clients at industry leading pricing. Our offered range of Centralized Grease Lubrication System is developed at pioneering production unit as per the market quality standards. Our organization is committed for the time bound delivery at any part of the country.
Features:
- Reasonable prices
- Precise engineering
- Quality assured