Srujana Industrial Marketing Associates

• Cost effective cable carrier
• Weight optimized chain geometry
• Particularly high torsional rigidity

1. Stable end connector made of steel  

2. Can be quickly opened on the inside and outside for cable laying

3. Bolted stays and cover systems

4. Aluminum stays available in 1 mm width sections

    

5. C-Rail for strain relief elements

6. Aluminum cover available in 1 mm width sections

    

7. Replaceable glide shoes

8. Large choice of stay systems and ways of separating the cables

• Large dimensions
• Low intrinsic weight
• TÜV design approved in accordance with 2PfG 1036/10.97

1. Variable connection for fast installation

2. Fixed dividers

3. Extremely quiet and low-vibration operation

4. Can be quickly and easily opened

• Long service life
• Ideal for highly dynamic applications
• High lateral stability
• Suitable for clean rooms
• Simple shortening and extension due to modular design

1. End connectors with optional strain relief

2. Interior gentle on the cables without projecting edges

3. Integrated noise damper

4. Dividers and height separation for separating the cables

5. Quick and easy opening from any position

6. Secure cover attachment even under severe stresses (e.g. due to hydraulic lines)

7. Chain links made of glass fiber-reinforced plastic

8. Pin/bore connection and stroke system covered completely

9. Designs with inward or outward opening crossbars

10. Cover completely detachable on one side

11. Cover sheet for universal end connectors

• Excellent cable protection in the connector area
• Chip and dirt resistant due to smooth surfaces
• Extensive unsupported length
• High torsional rigidity
• Good ratio of inner to outer width
• Low noise emissions
• Optional: On request, special material with protection against hot chips up to 850 °C
• Numerous custom material types for custom applications available
• Easy assembly
• Fast cable laying possible
• Easy-to-open cover with simultaneously high retention force on the chain link during operation
• Measurement scale for easy alignment of the dividers
• Strain relief can be completely integrated into the end connector (from TKA38)
• TKA55: IP54 tested and certified

• Extremely quiet due to internal noise damping system
• Favorable ratio of inner to outer dimensions
• Standard bend radii, applicationspecific intermediate radii upon request
• Variable pretension for many different applications possible
• Can be opened quickly on the inside and outside for cable laying
• Transmission of forces (tensile and thrust forces) over a large area – optimized link design – "life extending 2 disc principle"
• Wide range of options for internal subdivision
• Closed and open UMBs
• Various strain relief systems optionally available

• Plastic covers available in 50 mm width sections
• Can be opened quickly on the inside and outside for cable laying
• Extremely robust due to stable plate construction
• Universal connectors (UMB)
• Many separation options for the cables
• Replaceable glide shoes for long service life for gliding applications

• Aluminum cover systems available in 1 mm width sections
• Large dimensions
• Can be opened quickly on the inside and outside for cable laying
• Highly wear-resistant, replaceable glide shoes available – resulting in minimal wear at high speeds, sliding in the guide channel
• Different connection variants
• Different ways of separating the cables
• Optionally with strain relief
• TÜV design approved in accordance with 2PfG 1036/10.97

1. Universal Mounting Bracket (UMB) with integratable strain relief comb

2. Designs with inward or outward opening crossbars

3. Extremely fast and easy to open due to ball joint mechanism

4. Frame stay

5. Single-part links (design 020)

6. Favorable ratio of inner to outer width

7. Many separation options for the cables

8. Robust, double stroke system for long unsupported lengths

9. Easy divider fixing

10. Extremely low noise due to internal noise damping

11. Lateral wear surfaces

12. Single-part end connectors with integratable strain relief comb

• Universal connection options
• Extensive unsupported lengths
• High torsional rigidity
• Good ratio of inner to outer width
• Low noise emissions
• Numerous custom material types for custom applications available
• Easy assembly
• Fast cable laying
• Assembly tools available
• Stays with ball joint, opening on both sides
• Strain relief integrated into the end connector
• Many possibilities for internal subdivision
• Optionally with C-rail integrated in the end connector
• Wear surfaces for gliding applications involving long travel lengths
• Fixable dividers

1. Low-vibration operation due to extremely reduced polygon effect

2. Continuously hingeless design

3. Suitable for very restricted installation areas

4. Quick opening and closing due to the design similar to a zip

5. Opening tool

• Easy installation of cables and hoses due to folding structure
• Installation of cables and hoses also possible with cables and assembled connectors
• Easy adaptation of cable carrier length
• Low weight, good ratio between inner and outer width
• Compact external dimensions for very restricted installation areas
• Low noise operation due to short pitch and extruded profile
• Low-vibration operation also at high velocities and travel accelerations
• Low dust generation as there is no friction between the chain links
• Flexible, also for lateral movement

1. Dividers and height separation for separating the cables

2. Designs with inward or outward opening crossbars

3. Quick and easy opening from any position

4. Integrated noise damper

5. Interior gentle on the cables without projecting edges

6. End connectors with optional strain relief

• Robust and extremely rigid stroke system
• Extensive unsupported length
• Low noise operation due to internal damping system
• Weight-optimized cable carrier geometry
• Interior without sharp edges, design gentle on the cables
• Variable inner distribution
• Vertical moveable dividers or with locking cams, can be attached at 2 mm increments (not B_i 16)
• Easy to open versions, left or right (not B_i 16)
• Quick and easy to open
• Optional strain relief can be completely integrated into the connecting element

Opening tools for UNIFLEX Advanced 1455, 1555, 1665

• Extremely quick and preserving material
• Open 1 m cable carrier in less then 2 seconds
• Can also be used in the guide channel
• Cable carriers containing cables can also be opened without problem.

1. Plastic stays available in 8 or 16 mm width sections

2. Enclosed stroke system not sensitive to dirt/contamination

3. Injection molded glide runners

4. Aluminum stays available in 1 mm width sections

    

5. C-Rail for strain relief elements

6. Can be opened quickly on the inside and outside for cable laying

7. Universal connectors (UMB)

8. Extremely robust owing to strong sideband construction

9. Glide discs

10. Minimized hinge wear owing to the “life extending 2 disc principle“

11. Many separation options for the cables

12. Dividers can be fixed

1. Aluminum stays available in 1 mm width sections

    

2. Plastic cover available in 25 mm width sections (LT 60)

3. Minimized hinge wear owing to the “life extending 2 disc principle“

4. Can be opened quickly on the inside and the outside for cable laying

5. C-Rail for strain relief elements

6. Closed and open universal mounting brackets (UMBs)

7. Replaceable glide shoes (H Series)

8. Variable pre-tensioning for the most varied applications is possible

9. Extremely quiet owing to internal damping system for pre-tension and radius strokes

10. Dividers can be fixed

11. Many possibilities for internal subdivision

• Low intrinsic weight
• Favorable ratio of inner to outer dimensions
• Standard bend radii, applicationspecific intermediate radii upon request
• Completely enclosed types, see MASTER TUBES

• Solid plastic
• Easy to open
• Robust, double stroke system for long unsupported lengths
• Particularly high torsional rigidity
• End connectors with integrated strain relief
• Economically priced standard types
• TÜV design approved in accordance with 2PfG 1036/10.97

Additional Information:

• Item Code: Design-080

• Aluminium cover system in 1 mm width sections, plastic cover system in 8 or 16 mm width sections available
• Can be opened quickly on the inside and outside for cable laying
• Extremely robust due to stable plate construction
• Enclosed stroke system not sensitive to dirt/contamination
• Transmission of forces (tensile and thrust forces) over a large area – optimized link design – "life extending 2 disc principle"
• Standard universal mounting brackets (UMBs)
• Many separation options for the cables
• Highly wear-resistant, replaceable glide shoes available – resulting in minimal wear at high speeds, sliding in the guide channel
• Various strain relief systems optionally available
• TÜV design approved in accordance with 2PfG 1036/10.97

1. Chain links made of plastic

2. Inside space is gentle on the cables – no interfering edges

3. Types with single-part chain links

4. Types with openable brackets

5. Connectors with integrated strain relief

• Cost-effective cable carrier
• Simple and quick assembly
• Almost all types available immediately ex stock all around the world
• TÜV design approved in accordance with 2PfG 1036/10.97

1. Sturdy two-component design: Hard cable carrier body, flexible film hinge

2. Chain links made of plastic

3. Extensive unsupported length

4. Inside space is gentle on the cables – no interfering edges

5. Extremely low noise due to integrated noise damping

6. Quick and easy to open

7. For inward/outward opening

8. Dividers and height separations for cable separation

9. Single-part end connectors with and without integratable strain relief

• Extremely fast and easy cable laying thanks to crossbar with film hinge
• Extremely low noise due to integrated noise damping
• Extensive unsupported length
• Each chain link consists of two different materials:
  • Hard cable carrier body made of glass fiber-reinforced material
  • Crossbar with flexible film hinge made of elastic special plastic
• Sturdy chain design
• High torsional rigidity

1. Sturdy two-component design: hard cable carrier body, flexible film hinge

2. Chain links made of plastic

3. Extensive unsupported length

4. Inside space is gentle on the cables – no interfering edges

5. Extremely low noise due to integrated noise damping

6. For inside/outside opening

7. Dividers and height separations for cable separation

8. Single-part end connectors with and without integratable strain relief

• Extremely fast cable laying thanks to easy cable insertion
• Very high fill level due to the crossbar pivoting to the side – crossbars do not pivot into the cable space
• Each chain link consists of two different materials:
  • Hard cable carrier body made of glass fiber-reinforced material
  • Crossbar with flexible film hinge made of elastic special plastic
• Sturdy chain design
• High torsional rigidity
• Extensive unsupported length
• Extremely low noise due to integrated noise damping

1. Universal connectors (UMB)

2. Dividers can be fixed

3. Can be opened quickly on the inside and outside for cable laying

4. Plastic covers available in 50 mm width sections (TKC series)

5. Plastic stays available in 50 mm width sections

6. Replaceable glide shoes

7. Extremely robust due to stable plate construction

8. Many separation options for the cables

1. Connectors with optional strain relief

2. Completely detachable covers

3. Easy and quick to open

4. Dividers and height separations for cable separation

5. Gentle on the cables – interior space without projecting edges

6. Chain links made of plastic

7. Extensive unsupported length

8. Designs with inward* or outward opening covers

9. Cover system also in the connection

10. Secure hold of the covers also under heavy load (e.g. by the use of hydraulic cables)

11. Very quiet thanks to integrated noise damping system

• Outstanding protection for the cables
• Quick cable laying – inside and outside opening designs
• Very quiet thanks to internal noise damping system
• Extensive unsupported length
• High-quality visual design
• For unsupported and gliding arrangements

• Solid plastic
• Easy to open
• Robust, double stroke system for long unsupported lengths
• Particularly high torsional rigidity
• End connectors with integrated strain relief
• Economically priced standard types
• TÜV design approved in accordance with 2PfG 1036/10.97

Additional Information:

• Item Code: Design-060

1. Connectors with strain relief comb

2. Very long life – no hinges and hence no hinge wear

3. Very good ratio of useful space to outer dimensions

4. Solid plastic cable carrier

5. Simple insertion of the cables

• Low vibration and quiet operation
• Optimal for short travel lengths and high travel speeds
• Gentle on the cables, since there is almost no polygon effect