- Home
- ยป
- Products & Services
- »
- Metallic Cable Drag Chain
Metallic Cable Drag Chain
We are able to gain immense expertise in delivering Cable Drag Chain to our clients. The offered range of cable drag chain is made utilizing high grade raw material and innovative technology in complete adherence with the international quality standards. Along with this, the offered range of cable drag chain is suitably checked on different characteristics to maintain its authenticity throughout the designing procedure.
Products that are included in this range are mentioned below:
Nylo Track Cable Drag Chain
Product Brochure
Spec. | Inside Width (a1) | Inside High (c1) | Bending Radius (R) | High (H) |
BNEE45KA | 50 | 45 | 125.150.175 | 2R 68 |
70 | 45 | |||
75 | 45 | |||
80 | 45 | |||
90 | 45 | |||
100 | 45 | |||
110 | 45 | |||
130 | 45 | |||
150 | 45 | |||
175 | 45 | |||
200 | 45 | |||
BNEE45KB | 50 | 45 | ||
70 | 45 | |||
80 | 45 | |||
90 | 45 | |||
100 | 45 | |||
110 | 45 | |||
130 | 45 |
Robotrax System Cable Carriers
Steel cable for transmission of extremely large tensile forces
Open design
Fast cable laying by simple pressing in of the cables – no threading through is necessary
Simple inspection of all the cables
Special plastic for long service life
Protective covers or heat shields made of different materials are available for different environmental conditions
Easy fastening on every chain link with quick-opening mounting bracket possible
- For three-dimensional movements
- Can be deployed on robots for swiveling and rotational movements:
The same system for robot feet and arms - With channel system, it is a universal solution for rotary applications
- Also ideally suited for rotary tables
- Optimum system for long service life of the cables:
– The minimum bend radius can be maintained
– The cables are cleanly isolated in three separate chambers
LS/LSX Series Cable Carriers
End connectors for different connection variants
Favorable ratio of inner to outer width – no peripheral divider necessary
Weight-optimized chain bands – specially coated or stainless steel
Optional central bolt for applications with large loads
C-rail for strain relief elements
Different stay variants available in 1 mm width sections
Strokes are integrated in the chain link plate – no additional bolts are needed
Dividers made of plastic or steel
Various cable separation options
- Improved dynamic characteristic values due to weight-optimized design
- Long unsupported lengths for small to medium additional loads
- Cover with steel band for protecting the cables is available on request
Type
Type |
Inside height (mm) |
Chain width (mm) |
Max. travel lengthA) (m) | Travel | Travel |
LS/LSX 1050 | 58 | 100-600 | 10 | 5C) | 10 |
S/SX Series Cable Carriers
All stays available in 1 mm width sections
4-fold bolted aluminum stays for extreme loads
Rolling stays
Aluminum hole stays
Mounting frame stays
Aluminum cover available in 1 mm width sections
Joint design with special bolt for a long service life
Bolted and riveted joint connections possible
Straight link plate design (S/SX1252/1252B and S/SX1802/1802B)
Cranked link plate design
Different separation options for the cables
Can be opened quickly on the inside and the outside for cable laying
Extremely robust side bands, galvanized or stainless steel
Replaceable glide shoes
End connectors for different connection variant
- Extremely robust, sturdy steel cable carriers for heavy mechanical loads and rough environmental conditions
- Side bands made of steel or stainless steel
- Very sturdy link plates, each consisting of two individual plates
- Very extensive unsupported lengths even with large additional loads
- Joint design with multi stroke system and special bolt
- Bolted stay systems, solid end connectors
- S series
Side bands made of galvanized steel - SX series
Side bands made of steel resistant to rust and acid
The design
Steel cable carriers with extremely sturdy link plates and a joint design with multi stroke system and special bolt, proven successful for many years. The extremely sturdy design provides extensive unsupported lengths and allows high additional loads.
Type
Type | hi | Bk | t |
S/SX0650 | 26-40 | 70-500 | 65 |
S/SX0950 | 40-48 | 125-600 | 95 |
S/SX1250 | 66-74 | 130-800 | 125 |
S/SX1800 | 104-110 | 180-1,000 | 180 |
S/SX2500 | 180-183 | 250-1,200 | 250 |
S/SX3200 | 220 | 250-1,500 | 320 |
S/SX5000 | 150 | 150-1,000 | 200 |
S/SX6000 | 240 | 200-1,200 | 320 |
S/SX7000 | 370 | 350-1,800 | 450 |
Mobiflex Cable Carriers
Completely enclosed cable carriers
Optimum protection for cables and hoses
Different end connectors
Flexible metal helical tube (zinc plated) combined with special steel band
- Very well sealed design
- Ideal in case of hot metal chips
- Optimum protection for cables and hoses
- Unsupported thanks to the inserted, pre-tensioned steel band
Type
Type |
Inside height (mm) |
Inside width (mm) |
Max. travel length (m) | Travel | Travel |
MF 030.1 | 24 | 26 | 2,0 | 10 | 20 |
MF 050.1 | 24 | 45 | 3,0 | 10 | 20 |
MF 050.2 | 44 | 45 | 3,0 | 10 | 20 |
MF 080.1 | 40 | 80 | 3,5 | 10 | 18 |
MF 080.2 | 54 | 80 | 3,5 | 10 | 18 |
MF 080.3 | 78 | 80 | 3,5 | 10 | 18 |
MF 110.1 | 53 | 109 | 4,0 | 6 | 15 |
MF 110.2 | 73 | 109 | 4,0 | 6 | 15 |
MF 110.3 | 108 | 109 | 4,0 | 6 | 15 |
MF 170.1 | 72 | 170 | 5,0 | 6 | 12 |
MF 170.2 | 102 | 170 | 5,0 | 6 | 12 |
MF 170.3 | 167 | 170 | 5,0 | 6 | 12 |
Conduflex Cable Carriers
Completely enclosed cable carriers in a sophisticated design
Optional: Protective straps for protecting the stop grooves against contamination
Attractive appearance due to stainless steel crossbars and frame made of fiberglass reinforced polyamide
Different end connectors
Optimum protection for cables and hoses
Quiet operation due to small pitch
- Attractive appearance owing to high-grade steel brackets and fiberglass reinforced polyamide frame
- Very well sealed design
- With protective straps ideal for hot chips
- Optimum protection for cables and hoses
- Quiet operation due to small pitch
- Easy replacement of the crossbars in the case of external damage is possible
- Easy to shorten or extend at a later date
- TÜV design approved in accordance with 2PfG 1036/10.97
Type
Inside height (mm) |
Inside width (mm) |
Max. travel length (m) | Travel | Travel | |
CF 055 | 25 | 45 | 3,0 | 10 | 20 |
CF 060 | 40 | 36 | 3,5 | 10 | 20 |
CF 085 | 38 | 73 | 4,0 | 8 | 18 |
CF 115 | 52 | 102 | 5,0 | 8 | 16 |
CF 120 | 70 | 100 | 5,5 | 6 | 15 |
CF 175 | 72 | 162 | 6,0 | 6 | 12 |
ECC -Emergency Cable Carrier
In applications in harsh environmental conditions it often happens that an object gets into the travel length of the carrier and blocks it. What is needed here is a system that detects such blockages and switches the system off. However, in large systems the moving mass is very large, which means that the moving unit continues to move for several meters even after braking is initiated. This leads to defects in the carrier, a complete failure of the system and extensive repair work. Our decoupling system for cable carriers offers, in addition to the emergency stop function, also a bridging safeguard for the braking distance.
Possible areas of application: all applications with long travel lengths, e.g.: crane, port, compost or coal conveyor systems, steel works and raw materials systems.
Guide Channels Cable Carrier
In the case of long travel lengths the upper trough of the cable carrier glides on its lower trough. Beyond the fixed point the cable carrier glides on the sliding surface (support) of the guide channel.
The guide channels prevent the upper trough from slipping off the lower trough and ensure quiet, low-wear operation.
Designs: Guide channels made of steel plate – standard designWith a one-sided cable carrier arrangement the cable carrier glides behind the fixed point on a continuous gliding surface with inclined slants.
With an opposing arrangement a glide plate is likewise attached to make a bridge between the fixed point connections.
To reduce the gliding resistance and wear between the cable carrier and support, a special gliding plate can be glued on. We recommend the use of special gliding plates at speeds > 0.5 m/s and with frequent travel cycles.
We also manufacture guide channels made of steel plate, customized for your application. In so doing, we can accommodate almost any wish as far as the special shape and fastening options are concerned
Standard design for customized fastening, e. g. by welding directly on site.
Modular guide channel system made of aluminium profile bars
Conduflex Cable Carriers
Completely enclosed cable carriers in a sophisticated design
Optional: Protective straps for protecting the stop grooves against contamination
Attractive appearance due to stainless steel crossbars and frame made of fiberglass reinforced polyamide
Different end connectors
Optimum protection for cables and hoses
Quiet operation due to small pitch
- Attractive appearance owing to high-grade steel brackets and fiberglass reinforced polyamide frame
- Very well sealed design
- With protective straps ideal for hot chips
- Optimum protection for cables and hoses
- Quiet operation due to small pitch
- Easy replacement of the crossbars in the case of external damage is possible
- Easy to shorten or extend at a later date
- TÜV design approved in accordance with 2PfG 1036/10.97
Type
Type |
Inside height (mm) |
Inside width (mm) |
Max. travel length (m) | Travel | Travel |
CF 055 | 25 | 45 | 3,0 | 10 | 20 |
CF 060 | 40 | 36 | 3,5 | 10 | 20 |
CF 085 | 38 | 73 | 4,0 | 8 | 18 |
CF 115 | 52 | 102 | 5,0 | 8 | 16 |
CF 120 | 70 | 100 | 5,5 | 6 | 15 |
CF 175 | 72 | 162 | 6,0 | 6 | 12 |
Mobiflex Cable Carriers
Completely enclosed cable carriers
Optimum protection for cables and hoses
Different end connectors
Flexible metal helical tube (zinc plated) combined with special steel band
- Very well sealed design
- Ideal in case of hot metal chips
- Optimum protection for cables and hoses
- Unsupported thanks to the inserted, pre-tensioned steel band
Type
Type |
Inside height (mm) |
Inside width (mm) |
Max. travel length (m) | Travel | Travel |
MF 030.1 | 24 | 26 | 2,0 | 10 | 20 |
MF 050.1 | 24 | 45 | 3,0 | 10 | 20 |
MF 050.2 | 44 | 45 | 3,0 | 10 | 20 |
MF 080.1 | 40 | 80 | 3,5 | 10 | 18 |
MF 080.2 | 54 | 80 | 3,5 | 10 | 18 |
MF 080.3 | 78 | 80 | 3,5 | 10 | 18 |
MF 110.1 | 53 | 109 | 4,0 | 6 | 15 |
MF 110.2 | 73 | 109 | 4,0 | 6 | 15 |
MF 110.3 | 108 | 109 | 4,0 | 6 | 15 |
MF 170.1 | 72 | 170 | 5,0 | 6 | 12 |
MF 170.2 | 102 | 170 | 5,0 | 6 | 12 |
MF 170.3 | 167 | 170 | 5,0 | 6 | 12 |
Uniflex Cable Carrier
Universal connectors (UMB)
Designs with inward or outward opening brackets
Robust, double stroke system for long unsupported lengths
Single-part connector with integratable strain relief comb
Designs covered on one side or on both sides with plastic cover system
- Cost-effective cable carrier
- Particularly high torsional rigidity
- TÜV design approved in accordance with 2PfG 1036/10.97
Type
Type |
Inside height (mm) |
Inside width (mm) |
Max. travel length (m) | Travel | Travel |
0345.050 | 20 | 15-65 | 80 | 10 | 50 |
0455.050 | 26 | 25-130 | 120 | 10 | 50 |
0555.050 | 38 | 50-150 | 125 | 9 | 45 |
0665.050 | 44 | 50-175 | 150 | 8 | 40 |
Turcite Sheet
Thickness | 1 - 5MM |
Color | Green |
Usage/Application | Industrial |
Brand | ROLLON / LUBRING |
Packaging Type | Sheet |
Surface Treatment | Color Coated |
I Deal In | New Only |
M Series Aluminum Stays
Aluminum stays available in 1 mm width sections
4-fold screw-fixed aluminum stays for extreme loads
Aluminum stays with ball joint
Aluminum hole stays
Mounting frame stays
Plastic stays available in 4, 8 or 16 mm width sections
Aluminum cover available in 1 mm width sections
Plastic cover available in 8 or 16 mm width sections
Can be opened quickly on the inside and the outside for cable laying
Fixable dividers
Locking bolts
Replaceable glide shoes
Universal end connectors (UMB)
C-rail for strain relief elements
Strain relief combs
- Encapsulated stroke system, dirt-resistant
- Durable sidebands through robust link plate design
- Easy assembly of sidebands through bars with easy to assemble locking bolts
- Long service life due to minimized hinge wear owing to the “life extending 2 disc principle”
- Variable vertical inner distribution optional with fixable dividers
- Large selection of vertical and horizontal stay systems and dividing options for your cables
- Universal end connectors (UMB) with integrated strain relief using strain relief comb or C-rail
- Can be opened on the inside and the outside for installation of cables and hoses
- Replaceable glide shoes for a longer service life with gliding applications on long travel lengths
- Aluminum stays with ball joint for easy opening
- Versions with aluminum stays in 1 mm width sections up to 800 mm inner width
- Versions with plastic stays available in 4, 8 or 16 mm width sections
Type
Type | hi | Bi | t |
M0320 | 19 | 25-280 | 32.0 |
M0475 | 28 | 24-280 | 47.5 |
M0650 | 38 | 50-500 | 65.0 |
M0950 | 51-58 | 45-600 | 95.0 |
M1250 | 66-72 | 71-800 | 125.0 |
M1300 | 87 | 100-800 | 130.0 |
C-Rail 34 x 15 mm
Fits all commercial clamps
(slit width 16 – 17 mm),
Types B
Material: Aluminium
Item-No.: 3926
Material: Steel
Item-No.: 3932
Attach profile with M 10 – DIN 6912 sockethead cap screws.
C-Rail 25 x 12 mm
Fits all commercial clamps
(slit width 11 mm),
Types LineFix
Material: Steel
Item-No.: 3934
Attach profile with M 6 – DIN 6912 sockethead cap screws.